[MLUG] Fw: changing nics

["Daniel Nowlin" <EMAIL:PROTECTED>]

Man, I feel like such a noob.  I found my problem, it is called spaghetti 
wires.  I did not have the server plugged into the switch.
Now on to a different small problem.  When I did a lsmod to see if the new 
module was loading I noticed that the old module was still loading.  I 
checked the modules.conf and modules files but could not find any reference 
to the old module.  Can anybody tell me where else a nic module could be 
loading from?
----- Original Message ----- 
From: "Nowlin, Dan" <EMAIL:PROTECTED>
To: <EMAIL:PROTECTED>
Sent: Thursday, February 17, 2005 20:08
Subject: changing nics


To start off I will let everyone know that I run Mandrake 10.1.
OK. I had an intel e100 dual nic in my linux server.  I decided that I
could use that card in another box to play with creating a router, so I
removed it from the server and installed a 3com card.  After the reboot
I ran harddrake and setup the nic.  When I restart networking everything
says it is OK.  I have the nic set with a static 1.200 IP, the router I
am using is 1.250, and another PC is at 1.1.  Here is the problem when I
ping from the server I get the following:

ping 192.168.1.250
>From 192.168.1.200 icmp_seq=1 Destination Host Unreachable

Anybody have any ideas what I did wrong?







-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 2/14/2005

_______________________________________________
members mailing list
EMAIL:PROTECTED
http://mlug.missouri.edu/mailman/listinfo/members