Re: [MLUG] Samba issues...

[George Robb <EMAIL:PROTECTED>]

Ok have an update...

Not the Raid and not the network...  it is samba on Linux talking to 
samba on Linux...  I hacked on the Raid box itself and couldn't get a 
hiccup then I threw every windows machine I had at it and couldn't get 
the server to break a sweat...  SO, the solution so far is nfs...  
(which I should have used from the start especially considering the 
awesome throughput...) 

Anyway...  I am still interested if anyone has had issues with 
mis-matched drives in a raid or if anyone has setup a freaky raid such 
as scsi matched with ide or other...

George




George Robb wrote:

> Hey all...  I have a few issues with my home server talking with my 
> workstations... My workstations are craping out on samba connections 
> after a random amount of time with active files still open...  only 
> change that is major is that I have setup a simple raid 1 array..   
> Anyone know or have similar issues between two miss matched 
> drives....  Specks as follows...  btw... md0 is a non issue...
> Gentoo 2.6.8
>
> Raid 1 between two Maxtor Drives  (one 7200 the other 5400 both 80 Gig)
>
> hdparm -d1 -u1 -c1 -k1 -m16 -a64 -A1 on both /dev/hdc -and- /dev/hdb
>
> EMAIL:PROTECTED robbg # cat /proc/mdstat
> Personalities : [linear] [raid0] [raid1] [raid5] [multipath] [raid6]
> md1 : active raid1 hdc2[1] hdb2[0]
>      522048 blocks [2/2] [UU]
>     md2 : active raid1 hdc3[1] hdb3[0]
>      77521536 blocks [2/2] [UU]
>     md0 : active raid1 hdc1[2] hdb1[1]
>      104320 blocks [3/2] [_UU]                   <--------------- this 
> is not an issue it is the boot partition and one disk is "gone"
>     unused devices: <none>
>
>
> Any suggestions or ideas welcome :)
>
> George
> _______________________________________________
> members mailing list
> EMAIL:PROTECTED
> http://mlug.missouri.edu/mailman/listinfo/members
>

_______________________________________________
members mailing list
EMAIL:PROTECTED
http://mlug.missouri.edu/mailman/listinfo/members