[MLUG] drive error

["Daniel Nowlin" <EMAIL:PROTECTED>]

Can anybody tell me what this means?  Do I have a drive with an error and if so what drive?

<log snip>

kernel: VFS: Disk change detected on device 08:00
kernel: sda: Unit Not Ready, sense:
kernel: Current 00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : READ CAPACITY failed.
kernel: sda : status = 0, message = 00, host = 0, driver = 28
kernel: Current sd00:00: sense key Not Ready
kernel: Additional sense indicates Medium not present
kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
kernel: sda: Write Protect is off
kernel:  /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
kernel:  I/O error: dev 08:00, sector 0
kernel:  I/O error: dev 08:00, sector 2097144
kernel:  I/O error: dev 08:00, sector 2097144
kernel:  I/O error: dev 08:00, sector 0
kernel:  I/O error: dev 08:00, sector 0
kernel: ldm_validate_partition_table(): Disk read failed.
kernel:  I/O error: dev 08:00, sector 0
</log snip>

 

<fstab>

/dev/hda1 / ext3 defaults 1 1
none /dev/pts devpts mode=0620 0 0
/dev/hdf1 /home ext3 defaults 1 2
none /mnt/cdrom supermount dev=/dev/hdb,fs=udf:iso9660,ro,--,iocharset=iso8859-1 0 0
none /mnt/floppy supermount dev=/dev/fd0,fs=ext2:vfat,--,codepage=850,iocharset=iso8859-1,sync,umask=0 0 0
none /mnt/zip supermount dev=/dev/sda4,fs=ext2:vfat,--,codepage=850,iocharset=iso8859-1,sync,umask=0 0 0
none /proc proc defaults 0 0
/dev/hde2 /var ext3 defaults 1 2
/dev/hde1 swap swap defaults 0 0
</fstab>

Daniel Nowlin
Datacenter
IATS

_______________________________________________
members mailing list
EMAIL:PROTECTED
http://mlug.missouri.edu/mailman/listinfo/members