Re: [MLUG] cd-r doesn't get detected?

Email address obfuscation in effect -- please click here to turn it off.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: EMAIL:PROTECTED
Subject: Re: [MLUG] cd-r doesn't get detected?
From: Neil Bradshaw <EMAIL:PROTECTED>
Date: Fri, 2 Mar 2001 13:22:21 -0600 (CST)
In-Reply-To: <EMAIL:PROTECTED>
Reply-To: EMAIL:PROTECTED
Sender: EMAIL:PROTECTED

Check to see if it's SCSI or IDE.

After that, make sure the kernel has SCSI support compiled into it. Then
make sure that the card is supported. Then check all the cables, pins,
etc. Make sure the settings are right, also.

If it's IDE, put it all on the same controller if possible. It makes life
easier. Again, check cables, pins, jumpers, etc. It's optimal to have a
CD-R on a separate controller (primary vs. secondary) so that you don't
tax the IDE controller during burning.

Regards,
Neil Bradshaw	
		
EMAIL:PROTECTED
http://web.missouri.edu/~npba45/

ALL YOUR BASE ARE BELONG TO US


--
To manage your subscription, go to http://mlug.missouri.edu/members/edit.php

Archives are available at http://mlug.missouri.edu/list-archives/

Follow-Ups:
- Re: [MLUG] cd-r doesn't get detected?
  - From: Michael <EMAIL:PROTECTED>

References:
- [MLUG] cd-r doesn't get detected?
  - From: Michael <EMAIL:PROTECTED>

Prev by Date: RE: [MLUG] network cables?
Next by Date: RE: [MLUG] network cables?
Previous by thread: [MLUG] cd-r doesn't get detected?
Next by thread: Re: [MLUG] cd-r doesn't get detected?
Index(es):
- Date
- Thread